- This topic is empty.
Viewing 1 post (of 1 total)
- POSTS
Hi All, I am just stepping the mast and have found a bit of slack in the rivets attaching the spreader bracket to the aluminium mast. If I drill out the old rivets and replace them 1. how do I get the old bits of rivet out of the mast? 2. What type of new rivet should be used? 3. what is the best size of replacement rivet?
I look forward to your suggestions. Vince
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.