Latest News: › Forums › General › Back-Flap Hinges ?
- This topic is empty.
- AUTHORPOSTS
- 16/08/2011 at 8:37 pm #4323
wayfarer5560
MemberHi
After my last trip out me and my crew managed to kick two of the legs that support the benches on my Mk2 GRP. This subsequently bent and damaged the hinges that are brass and i would assume are quite soft . Upon closer inspection one of the other hinges had been replaced with a SS version , so off i went to the hardware stores in town in search of these replacements but all i could find was normal steel hinges that will just rust . Does anybody have any ideas / know where i can find some of these hinges in SS again ? Any help would be much appreciated .17/08/2011 at 2:52 pm #10141Fantasia
MemberIronmogery direct have a selection including stainless: click here http://www.ironmongerydirect.co.uk/Products/Hinges/Fire_Door_Hinges/?med=131&voffer=654763458&gclid=CNDLzbzJ1qoCFUtA4QodfwK17A or you could try screwfix.com
17/08/2011 at 5:04 pm #10142wayfarer5560
MemberThanks for the link , i think the ones on ironmongery were to big but i will check screwfix now
17/08/2011 at 6:34 pm #10143Jonathan Jenkins
Memberor you could try
http://www.a2a4.com/acatalog/A2A4_STAINLESS_NAUTICAL_ACCESSORIES_10.html
I’ve used them before for stainless screws and bolts and they seemed pretty good.
Jonathan
- AUTHORPOSTS
- You must be logged in to reply to this topic.