Latest News: Forums Technical 40cm of 15mm diameter aluminium keel band needed!

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
  • AUTHOR
    POSTS
  • #4638
    Fundoctor
    Member

    Hi

    I need to replace 40 cm of keel band. I can get the part I need for £35 from Porters but due to courier charges this seems a nuts amount for £1 worth of metal. The band needs to be 15mm diameter and “D – shaped” in cross-section. Not rectangular. Gladly pay anyone with a strip £10. Will send photos for verification of specs to any correspondent

    But I need it pronto!

    Trevor
    W9002

    #11802
    #11803
    Fundoctor
    Member

    I very likely do – you just saved me at least £15 😛

    #11804

    Trev mate,
    I’ve got yards of the bl**dy stuff in my garage! (OK not yards, but a fair bit – there was a minimum order of 2m from a car restoration site I used)
    you need to drill and rebate the screw holes yerself mind!!
    here’s where I got it – 2 metres for about £14 including the VAT.
    https://www.vintagecarparts.co.uk/products/293-aluminium-strip-16mm-half-round
    how soon do you need it?
    Boris “Delphy” W6330.

    #11805
    Fundoctor
    Member

    Hey – it only gets better. Could you cut me 30cm of the stuff? Be nice to have it before Notts so if you were up to posting it up I would be up the moon. 18 Collingwood Road, BS6 6PD. Otherwise at the conference. What about £7.50 with postage or £5 at Notts?

    Trev
    W9002

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.