Welcome to the UKWA Home Page › Forums › Technical › How do you remove Water from centre section of a wyfr world › Reply To: How do you remove Water from centre section of a wyfr world
If you don’t have a drainage hole in the transom then I would recommend that you fit one.
We fitted one in our Wayfarer World after similar difficulties in removing water. It is fairly easy to do – I would suggest that you drill a pilot hole first – just to make sure it is in the best position. There are some drainage sockets with captive bungs e.g. RWO R2066
It is usually necessary to sponge the last of the water out through the inspection hatches – but most will come out through a drainage hole in the transom.
hope that helps